86-28-87559167
mobile: 8613551050780 the xhtf321n time code terminal has an active/standby switch function and two main control modules. it can automatically switch seamlessly when there is a problem with the module, improving the overall stability and reliability of the device.
the xhtf321n time code terminal can receive the beidou/gps satellite signal and the irig-b time code, and use the demodulated reference signal to accurately synchronize the time-frequency signal generated by the local frequency source, and finally output the irig-b time code, the local second pulse, and other time-frequency signals (you can replace the output board to customize different output signals), and provide ntp network timing service.
the xhtf321n time code terminal has a network management interface to facilitate monitoring and control of the working state of the device.
the xhtf321n time code terminal has an active/standby switch function and two main control modules. it can automatically switch seamlessly when there is a problem with the module, improving the overall stability and reliability of the device.
features
● stable and reliable receiving and demodulating functions;
● can receive multiple timing signals;
● the main signal input and output adopts electrical isolation circuit to resist interference and damage;
● flexible configuration of input and output signals according to user needs;
● network management;
● with active and standby switching;
● can receive external 10mhz frequency standard signal.
specifications
input signal | output signal | |||||
gps satellite signal | 1pps pulse | |||||
rf signal | gps l1 band | polarity | positive polarity | |||
capture time | hot start <10s, cold start <60s | level | ttl standard (optional: rs422/rs485) | |||
gps timing accuracy | better than 50ns | synchronization accuracy | <0.1μs | |||
physical interface | sma/bnc | |||||
physical interface | sma/bnc | irig-b(dc) | ||||
bd satellite signal | level | ttlrs422/rs485 (optional: hcmos) | ||||
rf signal | beidou b1 band | synchronization accuracy | <0.2μs | |||
capture time | hot start <10s, cold start <60s | irig-b (ac) | ||||
bd timing accuracy | better than 50ns | amplitude | 0.5~10vp-p | |||
number of ways | 1 way | modulation ratio | 2:1~6:1 adjustable | |||
physical interface | sma/bnc | load | 600ω balanced input | |||
irig-b (dc) | physical interface | sma/bnc | ||||
demodulation accuracyl | <0.2μs | ntp network timing | ||||
irig-b (ac) | timing accuracy | better than 1ms | ||||
demodulation accuracyl | <10μs | network management interface | support snmpv2 or custom communication protocol | |||
physical interface | sma/bnc | |||||
10mhz signal | ||||||
physical interface | sma/bnc | |||||
internal frequency source configuration | ||||||
high stable ocxo | ||||||
frequency accuracy | better than 5 × 10-12 / day | |||||
short-term stability | better than 3×10-11/s | |||||
daily aging rate | better than 5×10-10/day | |||||
dimension | ||||||
width × height × depth (mm) | 443 × 176 × 400 | |||||
19-inch 4u racking chassis | ||||||
electrical characteristics | ||||||
ac 220 × (1 ± 10%) v | ||||||
environmental characteristics | ||||||
working temperature | -10 ° c ~ 50 ° c | |||||
storage temperature | -40 ° c ~ 65 ° c | |||||
main functions | ||||||
(1) has beidou, gps, b code receiving function | ||||||
(2) has time display (year, month, day, day, hour, minute, second) function | ||||||
(3) has clock-setting, automatic over tolerance synchronization, lead/lag function | ||||||
(4) b code delay correction range 0.1μs~±999999.9μs, step 0.1μs | ||||||
(5) output multiple time code signals | ||||||
(6) has fault prompt function and can monitor equipment status through network | ||||||
(7) has active/standby switching function, which can switch modules manually or automatically. |
previous: xhtf361 series time synchronization sync. clock
next: no information
86-28-87559167
mobile: 8613551050780